Root cause:

If feature VLAN, LLDP have been set on vPAV, VF reset may fail becasue admin queue between PF/VF is busy. Then, vAPV will reboot.

Especialy, when running debug trace CLI on AVX, all PF/VF will start resetting at the same time.
Solution:

Set delay time on CLI debuge trace disable to prevent too many reset request.

On vAPV:

- Set multiple VLAN

- Turn on LLDP with each port

- write memory
On AVX:

- debug trace enable

- debug trace dump all

- debug trace disable