BUG-794: 40G NIC is hardware information is incorrectly shown on interface output in APV 9900 on R10.7.0.16.1

Review Request #245 — Created May 10, 2024 and updated

wli
APV10
794
tanya, timlai

40G NIC can't be recognized correctly in APV 7900/9900

APV9900.101.c2kmUrXFQS(config)#show interface port9
port9(port9): flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::20d:48ff:fe94:67f9 prefixlen 64 scopeid 0x7
ether 00:0d:48:94:67:f9
media: autoselect (40Gbase-CR4 <full-duplex>)
status: active
webwall status: OFF
Hardware is xl710_qsfp_a
Input queue: 0/4096 (size/max)
total: 131 packets, good: 131 packets, 10873 bytes
broadcasts: 0, multicasts: 131
0 64 bytes, 131 65-127 bytes,0 128-255 bytes
0 255-511 bytes,0 512-1023 bytes,0 1024-1522 bytes
0 input errors
0 runts, 0 giants, 0 Jabbers, 0 CRCs
0 Flow Control, 0 Fragments, 0 Receive errors
0 Driver dropped, 0 Frame, 0 Lengths, 0 No Buffers
0 overruns, Carrier extension errors: 0
Output queue: 11/256 (size/max)
total: 9 packets, good: 9 packets, 828 bytes
broadcasts: 0, multicasts: 9
1 64 bytes, 7 65-127 bytes,1 128-255 bytes
0 255-511 bytes,0 512-1023 bytes,0 1024-1522 bytes
0 output errors
0 Collisions, 0 Late collisions, 0 Deferred
0 Single Collisions, 0 Multiple Collisions, 0 Excessive collisions
0 lost carrier, 0 WDT reset
packet drop (not permit): 0
tcp 0 udp 0 icmp 0 ah 0 esp 0
packet drop (deny): 0
tcp 0 udp 0 icmp 0 ah 0 esp 0
300 seconds input rate 16 bits/sec, 0 packets/sec
300 seconds output rate 0 bits/sec, 0 packets/sec

APV9900.101.c2kmUrXFQS(config)#

Loading...