Bug 891 - SQA: 100G NIC does not show NIC speed
Review Request #294 — Created June 21, 2024 and updated — Latest diff uploaded
| Information | |
|---|---|
| timlai | |
| APV10 | |
| rel_apv_10_7, rel_apv_10_7_0_x900_support | |
| 891 | |
| Reviewers | |
| weikai, wli | |
Root Cause:
No consider E810 NIC physcial typeSolution:
Add E810 NIC physcial type and display speed is 100G-Fiber
APV9900.101.c2kmUrXFQS(config)#show interface port8
port8(port8): flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::20d:48ff:fe7e:db7c prefixlen 64 scopeid 0x4
inet 172.37.0.101 netmask 0xffff0000 broadcast 172.37.255.255
ether 00:0d:48:7e:db:7c
media: autoselect (100G-Fiber <full-duplex>)
status: active
webwall status: OFF
Hardware is e810_qsfp28
Input queue: 1/4096 (size/max)
total: 9 packets, good: 9 packets, 838 bytes
broadcasts: 0, multicasts: 9
0 64 bytes, 9 65-127 bytes,0 128-255 bytes
0 255-511 bytes,0 512-1023 bytes,0 1024-1522 bytes
0 input errors
0 runts, 0 giants, 0 Jabbers, 0 CRCs
0 Flow Control, 0 Fragments, 0 Receive errors
0 Driver dropped, 0 Frame, 0 Lengths, 0 No Buffers
0 overruns, Carrier extension errors: 0
Output queue: 20/512 (size/max)
total: 10 packets, good: 10 packets, 898 bytes
broadcasts: 1, multicasts: 9
1 64 bytes, 9 65-127 bytes,0 128-255 bytes
0 255-511 bytes,0 512-1023 bytes,0 1024-1522 bytes
0 output errors
0 Collisions, 0 Late collisions, 0 Deferred
0 Single Collisions, 0 Multiple Collisions, 0 Excessive collisions
0 lost carrier, 0 WDT reset
packet drop (not permit): 0
tcp 0 udp 0 icmp 0 ah 0 esp 0
packet drop (deny): 0
tcp 0 udp 0 icmp 0 ah 0 esp 0
300 seconds input rate 0 bits/sec, 0 packets/sec
300 seconds output rate 0 bits/sec, 0 packets/sec