Bug 76 - Build in 4x10G NICs should always mapped to port1 - port4 in any NIC options

Review Request #35 — Created Sept. 16, 2023 and updated Sept. 19, 2023, 11:49 a.m. — Latest diff uploaded Sept. 16, 2023, 1:14 a.m.

Information
Owner:	wli
Repository:	AVX2
Branch:
Bugs:
Depends On:
Reviewers
Groups:
People:	peteryeh, roland, timlai

Description

The detail port mapping should looks like following:
Build-in 4x10G NIC: Port1 ~ Port4
Slot 1(40G): Port5 ~ Port6
Slot 2(40G): Port7 ~ Port8
Slot 5(4x10G): Port9 ~ Port12
Slot 6(4x10G): Port13 ~ Port16
Slot 7,8(2x100G): Port17 ~ Port18

Testing Done

G8GC1hvtjV#show interface
mgmt(M1): flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.10.52.42 netmask 255.255.240.0 broadcast 10.10.63.255
inet6 fe80::20d:48ff:fe7b:8cba prefixlen 64 scopeid 0x20<link>
ether 00:0d:48:7b:8c:ba txqueuelen 1000 (Ethernet)
RX packets 1262 bytes 86822 (84.7 KiB)
RX errors 0 dropped 9 overruns 0 frame 0
TX packets 66 bytes 7136 (6.9 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
port1(1T): flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 00:0d:48:91:18:f9 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
status: no carrier Speed: Unknown! Duplex: Unknown! Auto-negotiation: off
0 lost carrier, 0 WDT reset
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
Intel XL722 10GbE SFP+

port2(2T): flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 00:0d:48:91:18:fa txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
status: no carrier Speed: Unknown! Duplex: Unknown! Auto-negotiation: off
0 lost carrier, 0 WDT reset
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
Intel XL722 10GbE SFP+

port3(3T): flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 00:0d:48:91:18:fb txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
status: no carrier Speed: Unknown! Duplex: Unknown! Auto-negotiation: off
0 lost carrier, 0 WDT reset
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
Intel XL722 10GbE SFP+

port4(4T): flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 00:0d:48:91:18:fc txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
status: no carrier Speed: Unknown! Duplex: Unknown! Auto-negotiation: off
0 lost carrier, 0 WDT reset
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
Intel XL722 10GbE SFP+

port5(1Q): flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::20d:48ff:fe73:f2b2 prefixlen 64 scopeid 0x20<link>
ether 00:0d:48:73:f2:b2 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 8 bytes 648 (648.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
status: active Speed: 40000Mb/s Duplex: Full Auto-negotiation: off
0 lost carrier, 0 WDT reset
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
Intel XL710 40G QSFP+

port6(2Q): flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::20d:48ff:fe73:f2b1 prefixlen 64 scopeid 0x20<link>
ether 00:0d:48:73:f2:b1 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 8 bytes 648 (648.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
status: active Speed: 40000Mb/s Duplex: Full Auto-negotiation: off
0 lost carrier, 0 WDT reset
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 16 bits/sec, 0 packets/sec
Intel XL710 40G QSFP+

port7(5T): flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 00:0d:48:92:08:13 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
status: no carrier Speed: Unknown! Duplex: Unknown! Auto-negotiation: off
0 lost carrier, 0 WDT reset
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
Intel XL710 10G SFP+

port8(6T): flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 00:0d:48:92:08:12 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
status: no carrier Speed: Unknown! Duplex: Unknown! Auto-negotiation: off
0 lost carrier, 0 WDT reset
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
Intel XL710 10G SFP+

port9(7T): flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 00:0d:48:92:08:11 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
status: no carrier Speed: Unknown! Duplex: Unknown! Auto-negotiation: off
0 lost carrier, 0 WDT reset
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
Intel XL710 10G SFP+

port10(8T): flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 00:0d:48:92:08:10 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
status: no carrier Speed: Unknown! Duplex: Unknown! Auto-negotiation: off
0 lost carrier, 0 WDT reset
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
Intel XL710 10G SFP+

port11(9T): flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::20d:48ff:fe92:817 prefixlen 64 scopeid 0x20<link>
ether 00:0d:48:92:08:17 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 8 bytes 648 (648.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
status: active Speed: 10000Mb/s Duplex: Full Auto-negotiation: off
0 lost carrier, 0 WDT reset
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
Intel XL710 10G SFP+

port12(10T): flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 00:0d:48:92:08:16 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
status: no carrier Speed: Unknown! Duplex: Unknown! Auto-negotiation: off
0 lost carrier, 0 WDT reset
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
Intel XL710 10G SFP+

port13(11T): flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::20d:48ff:fe92:815 prefixlen 64 scopeid 0x20<link>
ether 00:0d:48:92:08:15 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 8 bytes 648 (648.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
status: active Speed: 10000Mb/s Duplex: Full Auto-negotiation: off
0 lost carrier, 0 WDT reset
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
Intel XL710 10G SFP+

port14(12T): flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::20d:48ff:fe92:814 prefixlen 64 scopeid 0x20<link>
ether 00:0d:48:92:08:14 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 8 bytes 648 (648.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
status: active Speed: 10000Mb/s Duplex: Full Auto-negotiation: off
0 lost carrier, 0 WDT reset
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
Intel XL710 10G SFP+

port15(1H): flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 00:0d:48:6f:d6:f6 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
status: no carrier Speed: Unknown! Duplex: Unknown! Auto-negotiation: off
Intel E810-C 100G QSFP

port16(2H): flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 00:0d:48:6f:d6:f7 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
status: no carrier Speed: Unknown! Duplex: Unknown! Auto-negotiation: off
Intel E810-C 100G QSFP

G8GC1hvtjV#

You have a pending review.

Review Board 5.0.5

Bug 76 - Build in 4x10G NICs should always mapped to port1 - port4 in any NIC options